Bosch 4100DG-09 10-Inch Worksite Table Saw with Gravity-Rise Stand and Digital Rip Fence

Reviews of Bosch 4100DG-09 10-Inch Worksite Table Saw with Gravity-Rise Stand and Digital Rip Fence

1.) Bosch 4100DG-09 10 Inch Table Saw
Reviewed by: Judith F. Schmall Williamsville, NY USA
Rating:
I bought this saw for myself. I am a woman in my 60's with a passion for laying laminate floors. This saw is easy to assemble, and comfortable to use because the table easily elevates to the perfect height for you. I did my kitchen and dining room floors with it in one 3 day period and thanked my lucky stars for it.
The price online was really a bargain for a Bosch. It far outstrips everything I saw online or up close and personal at the local home improvement stores.
Almost better than its simple setup and movablity is being able to fold it up and store it compactly. My sons are getting in line to use it next and no problem - easy to tranport.


2.) An excellent product
Reviewed by: Matthew Dyer
Rating:
This is one heck of a saw. Everything is thought out. Everything is right there where you need it. Everything screws down tight and it's obvious that the people who designed the saw thought long and hard about how people work and put everything on the saw and in an easily accessible place to help them work. Using it is a joy. Yes, you pay about $200 more than the Rigid jobsite saw to get that experience, but it's one heck of a pleasant experience. The whole saw makes sense and works well.

The riving knife is great, and the blade guard makes complete sense. It takes about 15 minutes of practice to be able to whip the guards on and off, but once you're really got it it's astoundingly easy. It is also VERY easy to work with this saw with all the guards in place, and that's important.

A shopvac easily plugs into the back of the saw, and it does reduce dust significantly. You're still getting out the broom and dust plan, though.

It takes a bit of muscle to get this across a lawn and into a pickup truck, but it's not that bad. The stand is not wobbly at all once it's up and ready to work.

One problem I had was the fence would chatter as I tried to slide it back and forth. Quite annoying for a $700 saw. I smeared some paste wax on the rails, though, and the problem totally disappeared. I can now slide the fence back and forth with one finger, and it glides--almost--like a puck across an air hockey table. Cool.

I bought this back in February 2008, and I also purchased the outfeed extension, an excellent accessory (as is the left side extension). The long rails on the outfeed extension banged the digital box, but a call to Bosch customer service had them overnighting a new, shorter set of rails to me. Wow. That's customer service.

If you have a wife how demands to put a car in the garage ("It's my workshop, honey! Why do you keep calling it a garage?") or a need to take a saw around to different places or if you want to do your cutting in the driveway so you can clean up the sawdust with a leaf blower (and with MDF, this is a great way to do it), this saw is the cat's pajamas. I love it.




3.) What a saw!
Reviewed by: D. E. Mccusker Bellevue, NE United States
Rating:
This is my first worksite saw and it's simply great. I'm installing hardwood floors, baseboards, steps, and trim and this saw does everything. The fence is true and the adjustable height blade ensures that there will be minimum tear-outs. In fact, I haven't gotten any yet! The best feature has to be the gravity-rise stand. Talk about ingenious. A single twist of the lever and it'll fold/unfold with ease. What sold me on this saw was a review conducted by a master cabinet maker who put this saw through the same paces as he would his expensive cabinet saw...guess what...it performed admirably. I'm picky about my work and wanted a good saw that I can tote around from job to job. This is the one. I'm proud to say that I own one of these and have recommended it to several of my friends. Buy this and you won't be disappointed.

4.) This saw is Great, Love it!
Reviewed by: Roger in Virginia VA
Rating:
I am a beginner just learning woodworking (In addition to learning to Barbecue). I bought this table saw because I wanted a really good saw with lots of good features. This saw has it all. I've shown it to several of my neighbors who are experience woodworkers and they all like the features. I've used it for about a week and it really is easy to use. I'm not sure the digital rip device is worth the additional price but I do like that feature, perhaps as I gain more experience I will gain a greater appreciation for it.

5.) Cuts like butter
Reviewed by: Keith Rose Eastchester, NY
Rating:
Pretty straightforward assembly.
Directions actually pretty good. You have to read them carefully, but they make sense.
Portable stand also pretty easy to assmble. And pretty easy to use.

The saw cuts awesome. Very easy to rip long boards. Ive been doing a lot of work on an old house and this saw is very versatile. cuts accurately and smoothly.
I dont use the digital electronic measure much. The old fashoned ruler on the saw is very accurate, and quicker to use. But I am sure some people might like this.
Ive only had it about a month, but its holding up great, and very easy to use.
I generally like the Bosch products. I have an old Bosch drill and circular saw which have held up great over the last 12 years, and have become a loyal customer.


6.) Amazing
Reviewed by: maddie oklahoma city, Ok.
Rating:
My husband LOVES it. I would tell anyone to purchase this. I researched all stores and Amazon had the one to get.

7.) Great Saw
Reviewed by: Thomas Williams Birmingham
Rating:
I'm well pleased with the saw.
FYI: I also purchased the rear table extension and the right extension. Both extension are worthwhile to add to the saw. I did not have any trouble installing the extensions.

The digital readout on the saw fence appears to work well and is accurate enough for general use.
The gravity rise stand is excellent and well designed.

Time will be the ultimate judge on the saw, but my initial opinion is very favorable. It is a little on the expensive side, but as they say you soon forget what you paid for something if it works well.



8.) Bosch 4000 Portable Table Saw Review
Reviewed by: Mr. Gene Mid Atlantic
Rating:
Bosch 4000 model is very similar. Really like portability, balance whether folded or set up, and easy clean up. Recommend this pricey, but quality unit.

My only concern is the size of the table limits this unit to projects with less than full 4x8 sheet cut requirements.

Geometry and alignment have been very good given the platform.

Takes two people to get it in the truck due to awkward size/weight proportion, but is expected for the equipment.

9.) Bosch Saw
Reviewed by: tree man Corpus Christi, TX
Rating:
So far, I really like this saw. Easy to use, and easy to move around for good orientation especially in tight spaces. The dust collector is OK but not very effective. The fence works well and is quite accurate. The storage places for various accessories are very convenient.

10.) I love this saw
Reviewed by: Jim H. California
Rating:
This saw has done everything I have asked it to do and has done it well. When I am finished I fold it up and it has a small footprint in my small shop. If you have room for a large 220v cabinet saw and the money to buy it go for it, but this saw will not disappoint you.

11.) Quality machine that's easy to transport to the job site
Reviewed by: Home James
Rating:
I'm a homeowner who, for years, has relied on a very small 7 ¼ inch table saw that was hard-pressed to cut a straight line. So at long last, my wife suggested that I purchase a new professional table saw as a birthday gift. I own several other Bosch power tools and am delighted with them all. The new table saw measures up to my expectations of a high quality power tool. It is expensive, but worth the price!Bosch 4100DG-09 10-Inch Worksite Table Saw with Gravity-Rise Stand and Digital Rip Fence

12.) VERY NICE SAW
Reviewed by: Richard K. Helms FLORIDA
Rating:
I BOUGHT THIS SAW TO REPLACE A SMALLER AND LESS EXPENSIVE SAW. ALTHOUGH ON THE EXPENSIVE SIDE OF SAWS SIMILAR TO THIS, I WAS PLEASANTLY SURPRISED WITH THE QUALITY AND THE EASE OF USE AND SMOOTH CUTTING. SO THE COST WAS WORTH THE QUALITY. SAFETY WAS ALSO A CONCERN TO ME. AGAIN THE SAW RANKS HIGH IN SAFETY. WE HOPE TO GET MANY YEARS OF GOOD USE FROM THE SAW. TIME WILL TELL BUT I BELIEVE I HAVE A VERY FINE SAW. SO FAR I AM WELL PLEASE.

13.) Is there a better way?
Reviewed by: Old House Restorer Savannah, Georgia USA
Rating:
Wouldn't you be better off buying the 4100 and adding the digital rip fence separately? Appears that you can save decent dollars.

14.) Bosch 4100DG Saw
Reviewed by: Wolfledge Murfreesboro, TN
Rating:
Got mine yesterday (Sept 21, 2009), uncrated it and put it together (including gravity rise stand) with no problem. Instructions were easy to follow and illustrations clear. All measurements were dead on including miter slot to blade, 90 degree and 45 degree stops, and fence to blade. Also bought the two support extensions which installed easily. The only problem I encountered was the fence to blade zero with the pointer. I couldn't move the pointer far enough to zero it out with the fence against the blade. I will call Bosch about this but it doesn't appear that any additional adjustment is possible. It's out about 1/16th inch and I suppose I'll get used to it but for the money it should be dead on. The digital fence window is hard to read through but not impossible. I give the saw a fat 4 on a 1-5 scale because of the problems noted above but would buy it again in a heartbeat.

15.) Portable SAW...I can take anywhere plus it has wheels!
Reviewed by: Ramon Los Angeles, Ca
Rating:
I dont normally buy things that are set and forget. Or even use once and leave it collecting dust.

However, I know that if i ever have a job that requires my amateur skills i will definately bring out these guns.

This thing is simply practical. Easily movable, very storagable(if this word actually exists, lol).

The only negative thing i can think of is that it is not 100% stable. However, there are tricks to getting around this problem; like securing it to the ground with clamps, etc..

Because of this machine i found myself ordering dvd's that show me how to SAW and create other practical things....

PS This would make an awesome fathers day gift. I almost gave it to my dad, but forget it....I'd rather keep it.

16.) Good saw questionable digital fence
Reviewed by: John G. Oregon, USA
Rating:
Bosch 4100DG-09 10-Inch Worksite Table Saw with Gravity-Rise Stand and Digital Rip Fence
I bought this tool as my first table saw. I have been quite happy with the saw, but I question the value of the digital rip fence, especially at a $100 premium. My experience has been that it needs frequent calibration to the blade and turns itself off too soon. I find that the optical scale works better for me. I also find the aluminum table top sometimes marks the pieces being cut and precludes the use of magnetic feather boards or jigs. Overall a good saw for the price if you don't spring for the digital fence.

17.) Good saw bad fence
Reviewed by: Nasar Azam Glen Ellyn, IL United States
Rating:
With riving knife it is quite a safe saw. The fence is almost impossible to adjust. When the outer feed of the fence is 1/16th towards the blade from the in-feed, you are asking for trouble (kick back). Riving knife saved me from those kickbacks due to fence problems. Without a parallel fence, the best of the saws becomes useless.
Portability is good and power is sufficient for most of your work.

18.) You can save $100 on this unit on Amazon... READ!
Reviewed by: Frank E. Trinkle Valdosta, GA USA
Rating:
My main review of this saw is on the 4100-09 saw page rather than here. I only give this one 2 stars because you can save $100 on the price of this saw by buying the 4100-09 and the Digital Scale separately on Amazon.

Don't know why Amazon is charging $802 for this unit as it sits... but the Digital unit for the 4100-09 is only $102 on top of the $599 price of the 4100 and it is EXACTLY the same unit that is on the 4100DG-09 shown here for over $800. That's a savings of nearly $100.00.

It takes about 10-minutes to install the Digital unit on the 4100-09, turning it into this unit. Easy!

Don't waste your money. Go with separates and save!

UPDATE: Amazon has now changed their pricing structure on this item and the review above no longer is valid. Good on 'ya Amazon for valuing this item as it SHOULD be! Cheers!

Features of Bosch 4100DG-09 10-Inch Worksite Table Saw with Gravity-Rise Stand and Digital Rip Fence

4100DG-09 {NONE}: {NONE} (part# 4100DG-09) This item features: -Gravity-Rise Stand Patented for easy set-up and take down of your table saw. -Exceptional Portability - Quick and easy transport between jobsites. -Heavy Duty Construction - Built to last with powder coat paint finish for longevity. -8'' Treaded Pneumatic Wheels - Handles the toughest and unexpected jobsite terrain. -Collapsible Design - Minimizes storage space requirements. -Digital Measuring Display Precise and durable high-visibility LCD gauge and display that magnetically attaches to SquareLock Rip Fence. Measures within 1/32'' or 0.5 mm for accurate cuts. -Blade Diam: 10 in. -Arbor Diam: 5/8 in. -Speed: 3650 rpm [Max]. -Max: Cutting Angle: Bevel Angle Range -2 to 47 . -Amps: 15.00 A. -Power Cap.: 4 hp. -Height: 39.130 in. -Width: 30 in. -Depth: 20.90 in. -Wt.: 99 lb. -Price is for 1 Each.

With first-of-its kind design features, the Bosch 4100DG-09 10-Inch Worksite Table Saw with Gravity-Rise Stand and Digital Rip Fence is built for effortless, efficient, and accurate cutting that lets you quickly deliver products. And with its portable construction, which allows for transfer across even the roughest terrain, it makes an ideal addition to any work site.

The Bosch 4100DG-09 10-Inch Worksite Table Saw includes: Gravity-Rise Table Saw Stand with Pneumatic Wheels Digital Rip Fence SquareLock Rip Fence T-slot Miter Gauge Smart Guard

View Product Demo.

A soft-start and constant-response electronics keep cuts smooth and precise. View larger.

The easy-to-read LCD shows measurements that are accurate within 1/32 of an inch. View larger.

Gravity-Rise Stand for Easy Setup and Portability
The innovative Gravity-Rise Stand uses patented technology to make setup and takedown quicker than ever, so you can spend more time working. And this tool is extremely portable. The eight-inch treaded pneumatic wheels can handle the toughest terrain with ease, and the collapsible design minimizes storage space requirements, so transporting this stand to, from, and around the job site is a breeze.

This stand may be lightweight at 39 pounds, but it's built for durability. It sports a powder-coat finish for longevity.

Powerful Table Saw Designed for High-Precision Cutting
The 15-amp, 10-inch table saw generates a maximum four horsepower and 3,650 RPM for exceptionally clean cuts. Additionally, the tool features soft-start and constant-response electronics for exceptional power management and constant speed under any load. It features a 5/8-inch arbor size for use with compatible blades, and it will make bevel cuts between -2 and 47 degrees and dado cuts up to 13/16 inch.

Large Cutting Table and SquareLock Rip Fence
Made from precision-machined aluminum for rugged durability and long life, the 21.5-inch x 29.0-inch (LxW) cutting table easily handles large stock for ripping capacity up to 25 inches wide.

The unique, digital rip fence included with this saw attaches magnetically to the saw's best-in-class SquareLock Rip Fence so that the two move in unison. Engineered for maximum trueness--so you get accuracy with every cut--the SquareLock Rip Fence glides across the cutting table with ease for simple, one-handed operation, and it locks in place to make consistent, precise cuts.

The easy-to-read LCD takes measurements that are accurate within 1/32 of an inch, and it offers readout displays in increments of 1/8 inch, 1/16 inch, 1/32 inch, and decimal inches and metric increments up to 0.5 millimeters. The digital display allows faster setup for repetitive cutting tasks and reduces material waste by eliminating guesswork, plus its robust cast-aluminum body is designed to stand up to tough use.

Smart Guard System for Added Protection and Visibility
The first-of-its-kind Smart Guard System is a completely tool-free design that provides visibility and user protection, so you can see the cuts better while avoiding kickback or blade contact. The modular, three-piece system includes a built-in riving knife, barrier guard, and anti-kickback pawls, all which install within seconds and require no tools.

The Bosch 4100-09 10-Inch Table Saw with Gravity-Rise Stand measures 39.13 x 30.0 x 20.9 (WxHxD) inches and weighs 99 pounds (saw and stand). It is backed by a one-year limited warranty, 30-day money-back guarantee, and one-year service protection plan.

What's in the Box
Bosch 10-Inch Worksite Table Saw, Gravity-Rise Table Saw Stand with Pneumatic Wheels, Digital Rip Fence, SquareLock Rip Fence, T-slot Miter Gauge, and Smart Guard.

The saw's premium Squarelock Rip Fence glides easily for one-handed operation and optimum accuracy with every cut.

1.) Digital rip fence measures for accurate cuts;
2.) Modular smart guard system;
3.) Rip fence engineered for maximum trueness;
4.) Durable sub-base;
5.) Integrated carry handles;

Package Height x Length x Width: 39.2 in. x 39.2 in. x 30 in.
Package Weight: 125.2 lbs.

Accessories for Bosch 4100DG-09 10-Inch Worksite Table Saw with Gravity-Rise Stand and Digital Rip Fence